Disclaimer: This post may contain affiliate links, meaning we get a small commission if you make a purchase through our links, at no cost to you. For more information, please visit our Disclaimer Page.
Is there any way of increasing water pressure without the need to buy an expensive pump? Of course, there is!
However, people mostly buy water pumps when they face low water pressure inside their house. That’s one way to do it, but, there’s a couple of more ways to increase pressure without using a pump.
And, we are here to discuss everything about it. So, let’s start.
6 Tips to Increase Water Pressure without a Pump
In case you have low water pressure inside your house, no matter if only one faucet or the whole house is suffering, the first thing you will need to do is to find what’s causing it. That’s usually not that simple, but, sometimes, the problem can be located right in front of your nose.
So, we will now list a couple of the most common causes of low water pressure and see how to deal with them.
- Malfunction Valves
- Low water pressure Area
- Clogged pipes
- Leakage
- Faulty flow regulator
As we can see, these are the most common causes of low water pressure. So, you should always check for these causes first and determine whether or not should you do some repairs.
Never the less, let’s see how to increase water pressure without a water pump.
1. Replace Valves
When the valves are malfunctioning, that can result in a sudden loss of water pressure. Now, as we all know, if you tighten the valves too much, you will regulate the pressure. However, if valves are rusty and old, you can’t simply tighten them because they might break.
On the other hand, you can’t just ignore the fact that you have faulty valves and low water pressure. So, what can you do?
Well, the only reasonable thing to do in this case is to replace all rusty and old valves. This way, you will ensure that everything runs smoothly and water pressure will be back to normal.
However, if nothing changes, the cause might be located somewhere else. In that case, let’s continue further.
2. Unclog Pipes
Clogged pipes are the number one cause of low water pressure if you live in a place where the water is a bit harder. The adjective ‘’harder’’ means that the water is full of minerals that are easily brought into your home through the pipes.
And, these minerals will create all sorts of build-ups and clogs. So, the only thing to do is to locate the clog and clean it.
Also, if you have steel pipes, then you might be experiencing a corrosion build-up as well. Since the water will create rusty build-ups on steel pipes over time, you will most likely need to replace these pipes or remove the clog.
3. Repair Leaks
One of the most annoying problems that can occur in any household when it comes to plumbing is a leak problem. Namely, if you find out that some pipe in your water system is leaking, that means that there’s a crack somewhere.
And, fixing a crack will require you to put a bit more effort and time into it. In some cases, these leaks are not even fixable which will require you to change the whole pipe where the crack occurred.
However, that doesn’t have to be the case if you find out about the leaks as soon as it happens. Now, you will need to shut the water supply and make sure that there isn’t any water running through the cracked pipe.
Next, you will want to dry the whole area around the pipe and the pipe itself. It would be best if you could remove the leaking pipe from the water system and fix it somewhere else.
After that, you will need to repair the crack with a hand torch in order to melt the area around the crack and place a piece of metal around it. This will patch up the crack and the pipe will be good as new.
The last thing you will want to do is to place the pipe back in the water system and run water through the pipe. The water pressure should be back at a normal level and everything will be fine.
4. Inspect Water Pressure Regulator
In some cases, the problem might be located at the water pressure regulator. This is not that common a problem, but, it can happen to anyone.
Now, the easiest way to inspect if there is a problem with your water pressure regulator is to adjust it. Feel free to adjust the water pressure to a slightly higher level and see what happens. If nothing changes, then there’s definitely a problem with the water regulator.
This will most likely require you to change the whole water pressure regulator and get a new one that works just fine. However, if you are not 100 percent certain that the problem is located here, it is best to get a professional opinion.
Your local plumber will tell you exactly if the water pressure regulator is malfunctioning or not. And, with that information, you will know whether to change it or not.
5. Contact your Local Plumber
If you already checked all possible causes that we listed above and everything seems just fine, then calling a local plumber is essential. Now, the professional will always give you the exact explanation of what is wrong and what needs to be done.
The most common reason to call a plumber is when you live in an area where the water pressure is low. Since you can’t do much here all by yourself, you will need a professional to inspect your plumbing system and determine if there’s something wrong.
Conclusion: Increasing Water Pressure without Electricity
As we can see, increasing water pressure without a pump is actually not that hard. The only thing that you need to do is to determine the cause of loss of water pressure and deal with it accordingly.
In that light, we surely hope that this little guide helped you to increase water pressure at your household.
