Your well water stops and starts because the foot or check valve, which is supposed to prevent the well pressure tank from sending water back into the tank after it has built up with water pressure, has failed. It is either the valve is clogged or it has stopped working properly. What are the Signs …
If you are having problems in your household with low water pressure, sudden damp spots on your floor and carpet, and a higher water bill than usual then it’s possible that you are having problems with a slab leak.
A slab leak problem is often more common in places with frequent earthquakes. But, this doesn’t mean that they can’t occur elsewhere since a huge number of homes are built on a slab of concrete.
Slab leaks usually affect hot or cold water lines and can appear on any drain line from any home device that uses water.
It is crucial to be informed on slab leaks in case you ever find yourself in a situation dealing with one. We will try to give you some basic information and advice on what to do when dealing with this problem.
Low water pressure in a single faucet can be caused by lots of things. However, the situation only gets worse when the pressure drops only when you use hot water.
But, there’s nothing to be afraid of since this kind of problem is easily fixable and they can’t create many problems when it comes to plumbing.
Anyhow, one of the most common places where using hot water and the water pressure decreases is the bathroom sink.
Since the bathroom sink is usually a single faucet that means that the problem of low water pressure can be caused by only a few things.
That being said, let’s dig a bit deeper into this problem and see everything that you need to know about it. Let’s start.
As we all know, some households are not directly connected to the town water supply system, they are actually supplied by water through the overhead tank. Now, an overhead tank is a very convenient way of supplying your home with water if you live a bit further from town.
And, in most cases, this water supply system works just fine. However, there are all sorts of complications that can occur when it comes to the overhead tank system.
One of those complications is low water pressure. So, finding a solution and increasing water pressure is absolutely important.
In that light, let’s see how to increase water pressure from an overhead tank.
Most people have troubles when it comes to low water pressure in their showers, and, that can be really annoying. But, what if the water pressure in a shower is too high?
Well, this is a completely different scenario and it means that there’s something wrong with your plumbing. However, having high water pressure in your shower is also annoying since it makes your showers quite unpleasant.
Anyhow, the only solution is to reduce the water pressure in a shower so you can once again use your shower normally.
In that light, let’s see how to decrease water pressure in a shower. Let’s begin.
High water pressure is absolutely important when it comes to showering. It’s only normal to wash your body with normal water pressure and clean it properly. But, in some cases, water pressure will simply drop.
That’s one quite annoying problem that needs to be taken care of immediately. So, what exactly causes water to not come out of the shower head properly?
Stick around and see.
In case you noticed that there’s a change in water flow pressure at one of your faucets, you should immediately act on it. Namely, it happens to a lot of people that the water pressure drops and it comes back after a minute.
But, why is that happening?
And, how can you get your water pressure back to normal?
Well, this is most definitely a sign of a problem that is located somewhere inside your water supply line. So, let’s take a look at everything that causes water pressure to drops and then come back after a few minutes.
Most of the people are looking at how to increase water pressure inside their home, but, having good water pressure outside of your home is equally important. You simply can’t do chores in your garden if you don’t have at least normal water pressure.
And, in case you don’t have high outdoor water pressure, it is really important to increase it.
Therefore, let’s see how you can increase outdoor water pressure – in your garden.
Having high water pressure surely feels like a good thing, but, you couldn’t even imagine the downsides of that. On the other hand, people with low water pressure will certainly want to increase their water pressure by a significant amount.
Anyhow, high water pressure can damage your plumbing system and cause a variety of problems in your household. We all know that water pipes can only withstand a certain amount of pressure, therefore, having high water pressure can cause quite the mess.
So, in case you have quite high water pressure and it’s causing you problems inside your household, it is important to lower it down a bit. But first, let’s see a bit more about high water pressure and how it affects your plumbing.
If your water pressure suddenly drops below a standard 80 PSI, there is most likely a problem inside your plumbing system. However, for some people, a sudden loss of water pressure is caused by malfunctioning of the water supply line.
All in all, the problem is the same – your water pressure suddenly dropped significantly.
Now, the loss of water pressure can create all sorts of troubles inside your household. So, it is best to figure out the cause and fix it right away.
In that light, we are here to discuss everything you need to know about low water pressure in your house, and why it dropped all of a sudden.