Why is Water Not Coming Out of the Shower Head Properly?

High water pressure is absolutely important when it comes to showering. It’s only normal to wash your body with normal water pressure and clean it properly. But, in some cases, water pressure will simply drop.

That’s one quite annoying problem that needs to be taken care of immediately. So, what exactly causes water to not come out of the shower head properly?

Stick around and see. If you're in a hurry, then check out this list of the best handheld showerheads for low water pressure.

Why Does Water Not Come Out of Shower head Properly?

First of all, you will need to determine the problem in order to solve it. Now, we know that water is coming out of the shower head, and, in most cases, that’s where you will locate the problem.

However, there might be some other causes for this kind of problem, like a sudden drop in water pressure due to something else.

Anyhow, let’s see what causes water not to come out of the shower head properly.

• Dirty Shower Head
• Clogged Pipe
• Diverter Valve Malfunction
• Leaks

As we can see, not only are these problems causing water not to come out of the shower head properly, but they also indicate even bigger problems in the plumbing system. 

Let’s take a closer look at these problems one at the time.

1. Dirty Shower Head

If you notice that water is not coming out of your shower head properly, the first thing to check is if your shower head is covered with dirt. Now, since a lot of water comes through that shower head, there might be some nasty build-ups that can form inside the shower head.

We all know that water contains all sorts of minerals and sometimes, these minerals can form a build-up inside your shower head which will cause some problems.

So, here’s what you’ll need to do:

1. Remove Shower Head 
2. Determine whether is there any dirt or any kind of build-up
3. Clean the dirt
4. Reinstall the Shower Head

In case you don’t know how to clean the dirt or build-ups, you can always use a bit of baking soda and vinegar. The solution made out of the baking soda and a little bit of vinegar will slowly but surely remove any sorts of build-ups from your shower head.

This way, you’ll fix the problem and once again be able to have a proper shower.

2. Clogged Pipe

As we already said, checking for the showerhead build-ups is the first thing to do if you notice that water is not coming out of the showerhead properly. However, if you determine that everything is fine with the shower head, you should definitely check the pipe.

Now, the pipe that connects the main supply line with your shower might be clogged. How can this happen?

Well, there are lots of ways for a pipe to get clogged, and let’s see some of them:

Corrosion 

In some cases, there might be a corrosion build-up that’s blocking the water to come to the shower head. And that’s causing the problem in which the water will not come out of the shower head properly.

There will be less amount of water that comes to the shower head and that’s why you won’t be able to take a proper shower.

Mineral Build-up

The same goes for the mineral build-up. These minerals that can be found inside ‘’hard’’ water will definitely create a clog inside your water supply system after some time.

However, they are easily dealt with and they can’t create any other problems except low water pressure inside a shower head.

Piece of metal created the clog

There might be a chance that you actually have a piece of metal inside your pipe. But, how can this happen? Well, that piece of metal is actually part of your pipe. Namely, the corrosion and rust will bite the pipe which will result in cracks and water leaks as well.

So, one piece of metal that was a part of the pipe will be pushed by the water in the direction to the shower head, and it might get stuck somewhere inside the pipe.

That can lower water pressure and create all sorts of problems in the showerhead as well.

3. Diverter Valve Malfunction

If you have a bathtub with a shower installed in there as well, then you also must have a diverter valve. This valve is located at the shower faucet and it changes the flow of water. So, when you pull the diverter valve to one side, the water will only flow through the faucet or the shower head, depending on the side.

Anyhow, the problem might be located there as well. Simply speaking, if the diverter valve is old or just malfunctioning, water will not come out of your shower head properly.

This can happen due to the fact that diverter valve is regulating the flow of water and if it doesn’t work properly, neither will your shower head.

. Leaks

Sometimes, leaks can create all sorts of problems inside a plumbing system, and one of those problems is when water is not coming out of the shower head properly.

If there’s a leak somewhere down the main water supply line, the amount of water that comes to the shower head will be lowered. That’s why you need to check for the leaks and determine whether you need to replace the pipe where the crack is.

Usually, these leaks are easy to spot, so, there won’t be any complications when it comes to locating this kind of problem. However, fixing this kind of problem is a bit more expensive since you will most likely need to change the whole pipe.

Conclusion: Water Not Coming Out of Showerhead Properly 

In light of everything we said above, fixing a shower head problem is definitely the thing you need to do as soon as possible. Now, these are some of the most common causes which will not let water to come out of the shower head properly.

And, it’s all up to you now to determine the cause and fix the problem. We wish you luck with that